Contact us
Shandong BaoKun Machinery Co.,Ltd TEL:086-18553681768
MAIL:export1@baokun-cnc.com
ADD:Room 1113, Yangguangyibai 7 # Builiding, Kuiwen District, Weifang City, Shandong Province, China, 261014.

Basic 4X8 CNC Router

This model is the top sell model for woodworking purpose.

Product Details

Machine Frame 
OMNI cnc router is with extra thicken welded steel tubes, the thickness is at the top of cnc router industry in China. The 4 X8 cnc router is the basic size, also available size of 5 X 10 cnc router, 6 X 10 cnc router etc size.

HSD Hign Frequency Spindle 
Rack cnc router is with 3kw or more power HSD spindle or watercooling type. This one is with no maintenance, 6000-18000rpm..

Gantry 
The gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting.

Gantry Support 
The Gantry uprights are cast aluminium with heavy duty gussets formed into the casting. Each support is machined for housing the various drive assemblies including motors, bearings, belts, and wiring harnesses.

Rail Linear Guide 
Taiwan rail linear bearing ,double slippers,bearing heavy,working steadily.

Driver and Motor 
Stepper motors are motion systems allowing to have a high positioning precision. With their high power already at low speed, their stall torque and the possibility to divide the steps in microsteps, stepper motors can provide direct and precise motions in a small volume.

Workpiece Hold Down 
A matrix table and powerful vacuum pump, (up to 140m3/h, -85kpa) are used to allow the best vacuum hold down, this is essential for nested-based manufacturing.
The table has a 25mm thick phenolic vacuum table surface mounted onto the steel base frame.Non-vacuum table is also an option.

Vacuum Switches 
OMNI vacuum table is with multi zones, which allows the operator to switch from full sheet processing to smaller part processing. Every vacuum zone is controlled by separated.valves on the front of machine, and whole vacuum zones are with one general valves to control.

DSP Remote Controller(Other controllers are optional) 
High-speed processing operation is the micro-controller, PLC systems can’t match;Use embedded structure,
High degree of integration,
Strong stability,
Easy installation and operation;
U disk support, removable storage card reader, with USB Interface, high speed transfer,
Plug and play the full realization of all work offline.

Control Cabinet 
European IEC standard wiring, CE standard electrical device and sheethed cable connection. All the electrical components are housed. Overall Wiring layout is tagged in case the service is required, the customer can easily navigate the cabinet.


Tool Calibration/Tool Sensor 
CNC router comes standard with a Tool Calibration. This tool calibration or you may call it tool sensor makes calibrating tool lengths easy and quick.

Lubrication Tank 
After filled lube tank, every week move it to lubricate all 3 axis for longer life time working. Trying 15-40 motor oil to start or gear oil.

Optional

 

Vacuum Pump 
OMNI offer 3 kinds of vacuum pump as your working requirement and budeget. We suggest Becker brand rotary vane KVT3.14 with 4kw(380V 3 phase), 4.8kw(220V 3phase), which is German brand, or you could choose Tongyou brand vacuum pump if you have enough budget. If you have rather limited budget, but still need vacuum function, Jinqiaotong brand is not bad choice.

Popup Pin 
OMNI offers material location pop-up pins for all OMNI CNC Router model machines. The pins swing below the table surface thus moving out of the way of the cutting path. The pins can be machined for precision pin alignment to the axis of travel.

Rotary Device 
A rotary device includes a fixed body and a shaft. As 4th axis of cnc router, it could work instead of X or Y axis for column processing, such as chair jamb, stair jamb, roman column, pillar etc.
The column diameter it fixes could be from 10mm to 400mm, material could be wood, marble, foam etc.

Auto Prssure Plate 
When you cut or engrave thin less than 10mm material on cnc router, must encountered that uneven situation even you have fixed its edge by clamps. Today, OMNI offer a great device to solve this problem. We call it AUTO Pressure Plate. It could assist the surrounding area of spindle working be pressed to working table tightly. It suits the spindle diameter at 65mm, 80mm, 100mm

Dust Collector 
Protect your cnc router and employee from dust or powder while cnc router working, which ensures machine working precision, spare parts lifetime and working environment. See following video to see dust collector installation guide.

Mist Sprayer 
Oil mist/fog lubrication pump is driven by compressed air, sprays oil fog particles in the size between 0.5 and 15 0.5-15μm. It is application for lubrication and cooling of lubrication points. It is equipped with electromagnetic valve. When connected with main unit electric control, it can realize control of lubrication time.


































  • Solid steel frame constructure
  • High-frequency 4hp/6hp spindle
  • DSP remote Control user-friendly operator interface
  • Tool Calibration
  • High Speed 3-axis Motion Controller
  • Precision dual Y-axis micro stepping or servo drives
  • Available for  4X8 CNC Router, 5X10 cnc router, 6X10 cnc router etc any size.

CNC router can be used in following industries:

  • Building Industry (  Architectural Decoration Elements, Kitchen Cabinet & Door, Facades & Window, Furniture & Household Appliance, Column & Stairjamb)
  • Sign& Advertising ( Signage Indoor & Outdoor, Engraving& Bas-Relief, 3D Letters, Funeral)
  • Models & Prototyping
  • Plastics & Composites ( ACP, ACM and solid surface material etc )
  • non-ferrous metals & Marine
  • X,Y-Axis Travel: 1300mm*2500mm; 1500mm*3000mm, 2000mm*3000mm or more (4*8, 5*10, 6*10 etc)
  • Z-Axis Travel: 200mm or others
  • Spindle: 3kw watercooling 24000rpm or higher power; HSD3kw aircooling 18000rpm or higher power
  • Repeatability: +/-0 .05mm
  • Traveling Speed: 15m/min-50m/min
  • Drive System X and Y axis: Rack and Pinion, rail linear bearing
  • Drive System Z axis: Lead Screw, rail linear bearing
  • Standard Work Surface: Aluminum T-Plate Extrusion Combined Bakelite Vacuum Table
  • Motor: Stepper/Servo
  • Spindle Protection Device: digital spindle temperature monitor (not fitted for air-cooling spindle)
  • Command languages: G code, *mmg, *plt, *u00
  • Voltage: 380V/3phase; 220V/3phase

Controller

  • Type:  DSP Remote Controller/ NC studio/ Syntec
  • Interface: USB /PCIMC
  • Memory: 128 MB
  • File Type: G codes & PLT/ Gcode/ G code&M code

Optional

  • Auto Tool Changer System and Syntec

  •  Mechanical part of the machine ___________________________ 1 piece
  • Spindle Motor 3.0KW or others (is mounted on the machin_______ 1 piece
  • CNC electronic control box _______________________________ 1 piece
  • DSP(USB) console panel(Weihong controller or MACH3)________  1 piece
  • Water pump (for water cooling Spindle) ______________________1 piece
  • Cables for connection ____________________________________1 kit
 
SOFTWARE
TYPE3 or ARTCAM
 
SPTA  (Spare Parts, Tools and Accessories)  for the machine
1. Tool kit  _________________________________________________ 1 kit

2. Collets  ER20 or ER25 or ER32 ______________________________ 4 pcs

3. Clamps  for fastening workpiece  ____________________________  8 pcs

4. Kit of bits  ______________________________________________ 20 pcs

5. Brush____________________________________________________ 1piece

6. Allen Key _________________________________________________  4pcs

7. Open Spanner ____________________________________________  2pcs

8. Sealing Strip (if with vacuum table) _____________________________ 1 piece

9. Anchor Bolt _______________________________________________ 4-6pcs

Optional Accessories, click here for more accessories :

Rotary Device: Indexed as 4th axis for processing column material.

Vacuum Pump: Holding down material efficiently than clamps.

Dust Collector: Strongly suggest you get it if you process wood and plastic

Mist Sprayer: Good option if you process aluminium, marine etc


△ Back to top